$52.00
Bitscope Analog Probe PRB02 The Bitscope Analog Probe PRB02 is a very high impedance probe compatible with all BNC terminated BitScopes. It is the recommended choice for higher voltage signals ranging from 1V to 1kV (peak). It has fixed attenuation with low input capacitance suitable for use with sensitive high... Read More
3 in stock
The Bitscope Analog Probe PRB02 is a very high impedance probe compatible with all BNC terminated BitScopes.
It is the recommended choice for higher voltage signals ranging from 1V to 1kV (peak). It has fixed attenuation with low input capacitance suitable for use with sensitive high impedance circuits, especially at high frequency and/or higher voltages. The probe head is detachable and the probe cable terminated with a SMB connector (for RF work).
A full accessories kit with a range of probe tip adapters, ground connect, channel identifier and insulated compensation tool is included. If you need isolation to make differential measurements or you need to measure voltages higher than 1kV we recommend you contact us.
| Feature | Specification |
| Attenuation Ratio | 100:1 |
| Bandwidth | DC to 300MHz |
| Rise Time | 1.4nS |
| Input Resistance | 100MΩ |
| Input Capacitance | 5.5pF (typical) |
| Compensation Range | 10 to 35 pF |
| Maximum Voltage | 1500Vrms CAT-II |
| Working Voltage | <1V to 1kV (peak) |
Comes with detachable head & accessories kit.
From Bitscope.
| Weight | 0.85 kg |
|---|---|
| Dimensions | 18 × 13 × 2 cm |
© All rights reserved 2020. Australian UAV Technologies Pty Ltd T/A Silvertone® Electronics 2020
Flamingo® and Silvertone® are registered trademarks of Australian UAV Technologies Pty Ltd T/A Silvertone® Electronics 2016
©2024 All Rights Reserved | Website designed by Simple Pixels
We use MXGuardDog spam blockers.