Aerobits ADSB
Aerobits ADSB
Aerobits ADSB was founded following a breakthrough technical solution that allowed for the extreme miniaturization of ADS-B without any compromises, i.e. while maintaining enormous computing power.
UAS is a technology with unlimited possibilities and applications. In every sector: civil, commercial and military, the number of applications that will influence our daily lives is growing dynamically.
Currently, UAS is more ‘manned’ than ‘unmanned’ and operates mainly in RPAS mode, i.e. with limited autonomy.
This is less due to technological limitations and more from the UAS integration method into the airspace. It is a global problem that is often referred to as the greatest challenge of modern aviation.
The potential of unmanned technologies is so huge that each country launches its own initiatives to accelerate the integration process.
Aerobits ADSB supports such initiatives and provides subsystems for the UAS integration into the airspace. We specialize in air traffic control systems (manned and unmanned), which are an important component of future UTM and U-Space solutions. In addition to the broadly understood UAS market, Aerobits also supports the transformation process of manned aviation, in line with the NextGen philosophy.
TT-MC1
The Aerobits ADSB TT-MC1 series are the fastest ADS-B and mode A/C/S implementations with dimensions 18.0 × 19.0 x 2.5mm and weight 1.5g (version “A”).
Multi-core technology along with FPGA power allows you to process a huge amount of data in real time requirements.
In addition, there is a possibility to connect the pulse per second signal from an external GNSS source, which allows to inclusion of time stamps, facilitating the implementation of multilateration algorithms.
TT-SF1
TT-SF1 is a high quality, low price OEM ADS-B/GNSS receiver with built-in FLARM transceiver.
It is based on the proven FPGA-In-TheLoop technology, which is a unique combination of a single-core processor and FPGA.
The patented solution allows high-speed RF data processing with a significantly reduced number of electronic components. Fast UART interface, easy configuration with AT-commands allows for simple integration.
TT-SG 1
TT-SG1 is high quality and low price OEM ADSB/GNSS receiver series operating at a frequency 1090MHz.
It is based on the proven FPGAInTheLoop technology, which is a unique combination of a single-core processor and FPGA.
The patented solution allows high speed RF data processing with significantly reduced number of electronic components. Simultaneous miniaturization of the module and its OEM nature open a wide range of possible applications.
TT-SC1
TT-SC1 series is the smallest implementations of ADS-B in the OEM concept. Version “A” module size is 16.0×13.0×2.5 mm, weight 1g and has a power consumption of 70mA at 3.3V. It gives a wide range of applications, especially directly in UAS control systems.
In TT-SC1a RF terminal is internally matched to 50ohms, so it enables to use of any antenna connector on target board. TT-SC1b is slightly larger than version “A” and has been equipped with an U.FL antenna connector and ESD protection on the RF line.
TT-SC1-EXT
TT-SC1-EXT series are the smallest implementations of ADS-B and mode A/C/S in the OEM concept. Version “A” module size is 16.0×13.0×2.5mm, weight 1g and has power consumption 70mA at 3.3V. It gives a wide range of applications, especially directly in UAS control systems. In TT-SC1a-EXT RF terminal is internally matched to 50ohms, so it enables to use any antenna connector on target board. TT-SC1b-EXT is slightly larger than version “A” and has been equipped with an U.FL antenna connector and ESD protection on the RF line.